Getting start with your Minny 3D Printer


 

Now that you've received your Minny 3D Printer, it's time to unpack and get familiar with your printer and accessories.

INFO! Before starting, we recommend accessing our list of Safety Procedures

 

UNPACKING YOUR 3D PRINTER

  1. Unpack the machine
  2. Remove the plastic bag and plastic protectors

 

      

 

Placement Cautions
  • Do not place the machine on the edge of a table
  • Do make sure the table can bear the machine’s weight.
  • Install the machine on a flat and stable surface (the inclination should not be more than 5 mm (0.19 inches).Otherwise, this could affect the printing quality.

 


 

CHECK ALL ENCLOSED ITEMS INSIDE THE BOX

1. 3D Printer 4. USB Cable
2. Print Head 5. Dongle Box
3. Power Cable 6. Scrapper

 

 

 


 

3D PRINTER COMPONENTS OVERVIEW

1. Color LCD 4. Cartridge Slot
2. Translucent Door 5. USB and Ethernet
3. Building Platform 6. Wi-Fi antenna

 

 


 

CONNECT AND START YOUR MINNY PRINTER

  1. Connect the wifi antenna on the back of 3D Printer
  2. Attach the power cable to the Minny power socket.
  3. Plug the USB cable into the left side of the Minny
  4. Press Button ON/OFF to turn on the machine

     

 


 

INSERT THE MATERIAL CARTRIDGE INSIDE THE 3D PRINTER

WARNING! Please make sure your printer status is READY before opening the door

  1. Break the material cartridge “ear”
  2. Remove the sealing foil.
  3. Put the material cartridge in the cartridge slot. Make sure the cartridge fits the slot guides.
  4. Use the slot guide to guide the material cartridge until the end of the slot.

 


LCD DISPLAY OVERVIEW

The LCD display provides an overview of the print job’s information and status.

  1. Status: Current status of the printer.
  2. Percentage: The current percentage of the job completed.
  3. Elapsed: The elapsed time of the printing (HH:MM).
  4. Current: The current layer that is being printed.
  5. Total: The total number of layers in the object.
  6. Remaining: The remaining time to finish the printing (HH:MM).



 


 

SOFTWARE SETUP

Now that your Minny printer is CONNECTED and READY, it's time to REGISTER and SETUP your UNYK SOFTWARE. Please click HERE to see how to do it. 

 



Share this article